DS-K1T671TM-3XF Ultra Face Recognition Terminals

  Ultra Face Recognition Terminals

  • Supports Vanadium Oxide uncooled sensor to measure target’s temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
  • Recognition distance: 0.3 to 2 m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
  • Watchdog design and tamper function
  • Audio prompt for authentication result
  • NTP, manually time synchronization, and auto synchronization
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
  • Imports and export data to the device from the client software
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
  • Temperature Measurement
  • Temperature Range30 °C to 45 °C (86 °F to 113 °F)
  • SensorVanadium Oxide uncooled sensor
  • Resolution120 × 160
  • Frame Rate25 fps
  • Measurement Accuracy0.1 °C
  • Measurement Deviation± 0.5 °C, without black body calibration
  • Measuring Distance0.3 to 2 m
  • Screen
  • Size7-inch
  • TypeTouch screen
  • Operation MethodTouch screen
  • Camera
  • Pixel2 MP
  • Lens
  • Dual-lens
  • Network
  • Wired NetworkSupport, 10/100/1000 Mbps self-adaptive
  • Interface
  • Network Interface1
  • Lock Output1
  • Exit Button1
  • Door Contact Input1
  • Authentication
  • Card TypeMifare 1 card
  • Function
  • Face Anti-SpoofingSupport
  • Audio PromptSupport
  • Others
  • Working Temperature0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
  • Working Humidity10 to 90% (No condensing)
  • Application EnvironmentIndoor and windless environment use only
Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DS-K1T671TM-3XF Ultra Face Recognition Terminals”

There are no reviews yet.

× How can I help you?